Tried all step for unlock dvd-r mfd2, single step dvd, master mode. unlock dvd mfd2 but it still not unlock.
this program i don't have power, you guys can help me?
A:
This is a bit long but I'm going to post it.
I can't believe it but I did it:
Unlock mfd2 discs and firmware update in program x1 speed with udev package, and then add ISO bootloader with udev package and menu tools package.
This is a long process.
You need the following:
Before the process i need to be installed in my computer the following:
1. firmware update to 030 and unlock.
2. power and pc to have working.
3. xp x64 or x86.
4. ubuntu 10.10 for x64 or x86 (both ).
5. ubuntu 8.10 x64 or x86 (both ).
6. ubuntu 10.04 x64 or x86 (both ).
7. windows 7 (x64) for usbsu.
8. Windows 7 - Recovery Disk for usbsu.
9. The iso files (mfd2 or dvd mfd2)
10. The drivers for usb,
11. Dvdrom
12. Usbsu.
and it is necessary to have the driver for usbsu.
This will be explained in the next few pages.
First you need to unlock your dvd-r mfd2 with the program cdburnerxpi as explained in previous links and
CdburnerXpi – Windows 7
Go to the downloads page and download the file CdBurnerXPi_x86_64.exe and extract.
You need to go to the CdBurnerXPi folder and run the file CdBurnerXPi_x86_64.exe
You will receive the message you are not
authorized to proceed.
Read carefully the section Installing the program.
It is necessary to make changes to
Control Panel –> 01e38acffe
Once inserted, the VWMFD2DVDEU0030.iso CD will show up on the VWMFD2 menu. Choose it and wait for the VWMFD2 to load the firmware.
This should be done now
Update flash disk via Windows - VWMFD2DVDEU0030.iso
1) Open VWMFD2 menu
2) Select: "Unlock DVD MFD2" (not DVD) (TDK / Verbatim CD-R max 8x)
3) Click "Unlock DVD MFD2" (not DVD) (TDK / Verbatim CD-R max 8x)
4) It will wait for the CD to load the firmware.
5) When the firmware has been loaded, press "Continue"
6) Select your flash disk (WD1003A)
7) Press "Start"
8) Wait for the process to be finished
9) Close the VWMFD2 menu
Now reboot the computer and you should have your DVD drive back.
Important: The firmware must be loaded via the new DVD burner before rebooting the computer.
If you are experiencing a problem with the DVD-R/RW drive, please open VWMFD2 and press CTRL+C to cancel the "Unlock DVD MFD2" menu and open VWMFD2 again.
Unlocking DVD-RW drive
1) Open VWMFD2 menu
2) Select: "Unlock DVD MFD2" (DVD) (TDK / Verbatim CD-R max 8x)
3) Click "Unlock DVD MFD2" (DVD) (TDK / Verbatim CD-R max 8x)
4) It will wait for the DVD to load the firmware.
5) When the firmware has been loaded, press "Continue"
6) Select your DVD-RW drive
7) Press "Start"
8) Wait for the process to be finished
9) Close the VWMFD2 menu
Now reboot the computer and you should have your DVD-RW drive back.
Important: The firmware must be loaded via the new DVD burner before rebooting the computer.
If you are experiencing a problem with the DVD-RW drive, please open VWMFD2 and press CTRL+C to cancel the "Unlock DVD MFD2" menu and open V
Related links:
Comments